Removable Hooks

To Apply

1. Clean surface, ensure surface is clean, dry and free from dust. Clean with isopropyl alcohol.

2. Peel release paper.

3. Apply strip to back of hook and press firmly. Peel remaining release paper.

4.Press hook firmly to wall and apply pressure evenly for 30 seconds. Wait 1 hour before using the hook to hang anything, this ensures that the adhesive has had enough time to build strong adhesion to the wall or surface.

To Remove

1. Hold hook firmly with 1 hand and hold release tab in the other.

2. Slowly pull tab straight downwards, as the adhesive stretches continue pulling slowly, keeping the adhesive close to the wall until hook becomes free.

Picture Strips

To Apply

  1. Clean surface, ensure surface is clean, dry and free from dust. Clean with isopropyl alcohol.

2. Separate each strip and press the individual hook and loop pairs together.

3. Peel release paper from the loop strips.

4. Apply 4 pairs vertically to frame, press firmly.

5. Peel release paper from the hook strips, align frame and press firmly against wall.

6. Press each pair for 30 seconds.

7. Carefully remove frame by gently peeling away from the wall, start at the bottom.

8. Evenly press each strip for 30 seconds. Wait 1 Hour before placing frame back into position, this ensures that the adhesive has had enough time to build strong adhesion to the wall or surface.

To Remove

1. Carefully remove frame by gently peeling away from the wall, start at the bottom.

2. Hold strip firmly with 1 hand and hold release tab in the other.

3. Slowly pull tab straight downwards, as the adhesive stretches continue pulling slowly, keeping the close to the wall until strip becomes free.

Mounting Tapes

To Apply

1. Clean surface gently with isopropyl alcohol, allow surface to dry completely.

2. Place in desired location and peel off release paper.

3. To attain the optimum bond, sufficient pressure should be applied evenly to the surface.

To Remove

Use dental floss to gently cut through the foam substrate and remove the object
from the surface. Stretch or peel off the remaining adhesive, use an adhesive solvent
for best results.