Mounting Tapes

For all Permastik Mounting Tapes, the ideal application temperature is 10-36°C. For applications below 10°C heat the surface with a hair dryer and apply tape to surface while the temperature is still above 10°C.

Permastik Indoor Mounting Tape: works on most indoor surfaces that are dry, clean and smooth. Permastik Outdoor Mounting Tape: works on many surfaces including metal, glass, finished and painted wood, vinyl and plastic. None of the mounting tapes are recommended for use on wallpaper or delicate surfaces.

Please note certain surfaces will require priming or sealing such as porus surfaces, e.g.. plaster, concrete and also absorbent surfaces such as untreated timber and fabrics. Metals with oxidised surfaces such as aluminium, copper and brass may need priming or abrading. Low energy surfaces such as non-stick paints or polypropylene plastics containing aggressive plasticisers may also need treatment.

Mounting Tape is intended to be permanent, and removal may damage surfaces.

If you do wish to remove mounting tape we recommend using dental floss to gently cut through the foam substrate and remove the object from the surface. Stretch or peel off the remaining adhesive, use an adhesive solvent for best results.

Permastik Outdoor Mounting and Clear Mounting Tapes have UV-resistant adhesives so they hold up under UV exposure. These tapes are also waterproof as long at they are applied to a clean dry surface.

Due to safety concerns, it is not recommended to exceed the weight limits for Permastik Mounting Tapes.

Permastik Mounting Tapes come in a variety of thicknesses between 1-3mm.

Removable Hooks

For all Permastik Removable Hooks, the ideal application temperature is 10-40°C. For applications below 10°C heat the surface with a hair dryer and apply to surface while the temperature is still above 10°C.

Paint should be fully cured (check paint can for manufacturer’s cure time) before using any Permastik Product. We recommend waiting a week before use on fresh paint. Also, isopropyl alcohol may remove or dull the surface of fresh paint.

No. Most wallpapers are too delicate and can tear when adhesives are applied.

Use dental floss to gently cut through the adhesive substrate and remove the object from the surface. Stretch or peel off the remaining adhesive, use an adhesive solvent to best results.

The one-hour wait ensures that the adhesive has had enough time to build strong adhesion to the wall or surface.

Due to safety concerns, it is not recommended to exceed the weight limits for Permastik Removable Hooks.

Permastik picture strips are designed only to be used in 4 pairs, we cannot guarantee the effectiveness of the product if more or less than 4 pairs are used.

Many household and window cleaners leave behind a very thin layer of residue that affects how strongly the adhesive will bond to the surface.

Stik Dots

Permanent dots contain a stronger adhesive to the Removable dots. Permanent dots are best to use when a stronger fix is required such as scrapbooking etc whereas Removable dots are best to use when a temporary fix is required such as posters.